text.skipToContent text.skipToNavigation

M30X380


The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and

Descrizione completa 
Numero articolo 90726FIS
Design Con estremità a bottone
Lunghezza (mm) 380
Dimensione della filettatura (metrica) 30
Diametro del foro (mm) 35
Profondità di ancoraggio effettiva (mm) 120
Visualizza tutte le specifiche 
Confezionato per 1

Specifiche

Design Con estremità a bottone
Lunghezza (mm) 380
Dimensione della filettatura (metrica) 30
Diametro del foro (mm) 35
Profondità di ancoraggio effettiva (mm) 120
Con capsula in resina No
Marchio Fischer
ETA-approval Yes
Weight per piece (g) 2124
Info
  • Ccr, N = Characteristic Edge distance (tensile).
  • Cmin. = Minimum edge distance (tensile).
  • df = Hole diameter in fixture.
  • do = Hole diameter in substrate.
  • hef = Effective embedment depth.
  • hmin = Minimum substrate thickness.
  • ho = Minimum hole depth.
  • Scr, N = Characteristic spacing.
  • Concrete C20/25 recommended load for non-cracked concrete.
  • The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descrizione

The fischer rod anchor RG M is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.

Numeri di articolo

Numero articolo 90726FIS
EAN 4006209907269
UBB 500616787312
UNSPSC 31161601
Nr articolo produttore  90726
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.