M12X210

Numero articolo	90286FIS
Diametro
Lunghezza
Design	Con estremità a bottone
Lunghezza	210
Dimensione della filettatura (metrica)	12

Visualizza tutte le specifiche

Confezionato per 1

Specifiche e standard
Download

Specifiche

Diametro	M12
Lunghezza	210 mm
Design	Con estremità a bottone
Lunghezza	210
Dimensione della filettatura (metrica)	12
Diametro del foro (mm)	14
Profondità di ancoraggio effettiva (mm)	70
Con capsula in resina	No
ETA-approval	Yes
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Scarica PDF Stampa

Descrizione

The fischer threaded rod FIS A is made from zinc-plated, steel grade 5.8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

Numeri di articolo

Numero articolo	90286FIS
EAN	4006209902868
UBB	500616696497
UNSPSC	31161601
Nr articolo produttore	90286

Scarica informazioni aggiuntive