text.skipToContent text.skipToNavigation

M10X110


The fischer threaded rod FIS A is made from stainless steel. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the syst

Descrizione completa 
Numero articolo 90444FIS
Diametro
Lunghezza
Design Con estremità a bottone
Lunghezza 110
Dimensione della filettatura (metrica) 10
Visualizza tutte le specifiche 
Confezionato per 1

Specifiche

Diametro M10
Lunghezza 110 mm
Design Con estremità a bottone
Lunghezza 110
Dimensione della filettatura (metrica) 10
Diametro del foro (mm) 12
Profondità di ancoraggio effettiva (mm) 60
Con capsula in resina No
ETA-approval Yes
Info
  • Ccr, N = Characteristic Edge distance (tensile).
  • Cmin. = Minimum edge distance (tensile).
  • df = Hole diameter in fixture.
  • do = Hole diameter in substrate.
  • hef = Effective embedment depth.
  • hmin = Minimum substrate thickness.
  • ho = Minimum hole depth.
  • Scr, N = Characteristic spacing.
  • Concrete C20/25 recommended load for non-cracked concrete.
  • The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descrizione

The fischer threaded rod FIS A is made from stainless steel. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system of stainless steel threaded rods in combination with fischer injection mortars is suitable and approved for fixings outside and in damp rooms without aggressive conditions.

Numeri di articolo

Numero articolo 90444FIS
EAN 4006209904442
UBB 500616698212
UNSPSC 31161601
Nr articolo produttore  90444
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.