KIPP Indexing plungers without collar, with key ring, without locknut Metric fine thread Steel 5.8, hardened pin Black oxide

Numero articolo
Marchio	Kipp
Class	5.8
Material	Steel
Surface treatment	Black Oxide
Thread	Metric fine thread
Info	Material: Steel grade 5.8. Key ring 1.4310, bright.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for actuation of the indexing plungers e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote control with Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is fitted onto the threaded sleeve so that the carrier pins engage in the slot.

Visualizza tutte le specifiche

Specifiche

Marchio	Kipp
Class	5.8
Material	Steel
Surface treatment	Black Oxide
Thread	Metric fine thread
Info	Material: Steel grade 5.8. Key ring 1.4310, bright.Version: Indexing pin hardened, ground, black oxidized.Note: Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been disengaged. The key ring is also suitable for actuation of the indexing plungers e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote control with Bowden cables. A screw-in washer can be supplied to help screw in the indexing plungers. The washer is fitted onto the threaded sleeve so that the carrier pins engage in the slot.

Per questo prodotto non sono disponibili documenti da scaricare

Prodotti ({0})

Mostra tutte le varianti

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.