text.skipToContent text.skipToNavigation

High performance anchor type FH II-S 15/25 H


The fischer high-performance anchor FH II H with cover nut is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the to

Descrizione completa 
Numero articolo 44909FIS
Diametro
Larghezza della chiave (mm) 17
Lunghezza (mm) 130
Tipo di filettatura Metric
Dimensione della filettatura (metrica) 10
Visualizza tutte le specifiche 
Confezionato per 1

Specifiche

Diametro M10
Larghezza della chiave (mm) 17
Lunghezza (mm) 130
Tipo di filettatura Metric
Dimensione della filettatura (metrica) 10
Diametro del foro (mm) 15
Numero di rondelle 0
Disposizioni di fissaggio Nut
Controventatura Ancora spaccata
Profondità di ancoraggio effettiva (mm) 70
Numero di dadi 0
Installazione a pressione SÌ
Installazione distanziata No
Spessore massimo di serraggio (mm) 25
Con collare No
Modello di ancoraggio Filo esterno
Marchio Fischer
Weight per piece (g) 151.292
Info
  • do = Nominal diameter of drill bit.
  • Min. td = Recommended drilling depth.
  • hef = Effective anchorage depth.
  • tfix = Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descrizione

The fischer high-performance anchor FH II H with cover nut is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II H with cover nut is ideally suited to fix steel constructions, machines, and gates in cracked and non-cracked concrete.

Numeri di articolo

Numero articolo 44909FIS
EAN 4006209449097
UBB 500616646815
UNSPSC 31162101
Nr articolo produttore  44909
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.