text.skipToContent text.skipToNavigation

High performance anchor type FH II-B M10X95/60


The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill

Descrizione completa 
Numero articolo 96941FIS
Diametro
Design Con estremità a bottone
Lunghezza (mm) 183
Dimensione della filettatura (metrica) 10
Diametro del foro (mm) 12
Visualizza tutte le specifiche 
Confezionato per 1

Specifiche

Diametro M10
Design Con estremità a bottone
Lunghezza (mm) 183
Dimensione della filettatura (metrica) 10
Diametro del foro (mm) 12
Profondità di ancoraggio effettiva (mm) 95
Con capsula in resina No
Marchio Fischer
Weight per piece (g) 111.926
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descrizione

The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas.

Numeri di articolo

Numero articolo 96941FIS
EAN 4006209969410
UBB 500616706544
UNSPSC 31162101
Nr articolo produttore  96941
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.