text.skipToContent text.skipToNavigation

High performance anchor type FH II-B M10X95/100


The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill ho

Pełny opis 
Numer artykułu 97620FIS
Diametro
Design Con estremità a bottone
Lunghezza (mm) 223
Dimensione della filettatura (metrica) 10
Diametro del foro (mm) 12
Zobacz wszystkie specyfikacje 
Pakowane po 1

Specyfikacje

Diametro M10
Design Con estremità a bottone
Lunghezza (mm) 223
Dimensione della filettatura (metrica) 10
Diametro del foro (mm) 12
Profondità di ancoraggio effettiva (mm) 95
Con capsula in resina No
Marchio Fischer
Weight per piece (g) 130.1
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Opis

The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas.

Numery artykułów

Numer artykułu 97620FIS
EAN 4006209976203
UBB 500616709936
UNSPSC 31162101
Artykuł producenta nr 97620
Nie zamykaj tej strony. Ten komunikat zniknie, gdy strona zostanie w pełni załadowana.