FISCHER Bolt anchor Steel Zinc plated

Numero articolo
Marchio	Fischer
Material	Steel
Approval	ETA Option 1
Surface treatment	Zinc plated
Thread	Metric thread
Info	T_inst= Tightening torque in Nm High permissible for assembly in tension zones! The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Visualizza tutte le specifiche

Specifiche

Marchio	Fischer
Material	Steel
Approval	ETA Option 1
Surface treatment	Zinc plated
Thread	Metric thread
Info	T_inst= Tightening torque in Nm High permissible for assembly in tension zones! The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.