Cross recessed raised cheese head thread cutting screw DIN 7516 AE-H Steel Zinc plated

Numero articolo
Driving features	Phillips
Head shape	Raised cheese head
Material	Steel
Surface treatment	Zinc plated
Thread	Metric thread
Info	The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests. The engagement depth should by no means exceed twice the nominal screw diamerter. Warning: electroplating of these products may cause hydrogen embrittlement.

Visualizza tutte le specifiche

Specifiche

Driving features	Phillips
Head shape	Raised cheese head
Material	Steel
Surface treatment	Zinc plated
Thread	Metric thread
Info	The predrill diamerter Drill ø (H11) is a guideline for medium strength material. For soft or thin materials a smaller hole can be chosen, for hard or thick material a bigger hole may be chosen. It is recommended to select the exact diameter based on tests. The engagement depth should by no means exceed twice the nominal screw diamerter. Warning: electroplating of these products may cause hydrogen embrittlement.

Standard

DIN	7516-AE H

Per questo prodotto non sono disponibili documenti da scaricare

Prodotti ({0})

Mostra tutte le varianti

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.