Conical seat DIN 6319 D Stainless steel A4 type D

Numero articolo
Marchio	Fabory
Material	Stainless steel
Material technical	A4
Info	F max = Maximum recommended static load (values do not apply to stainless steel). These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.type D

Visualizza tutte le specifiche

Specifiche

Marchio	Fabory
Material	Stainless steel
Material technical	A4
Info	F max = Maximum recommended static load (values do not apply to stainless steel). These conical seats are often combined with spherical washers DIN 6319-C. The combination enables a swing of approximately 3° in any direction to be attained, when positioning a bolt through. ATTENTION: When these conical seats are applied in combination with fasteners in class 10.9 or 10, the maximum allowable clamping load is at 46% of the yield strength R_p0,2 for fasteners in class 8.8 or 8 the maximum is at 66% of the yield strength R_p0,2 Do not apply these conical seats with slotted holes, but use conical seats to DIN 6319-G for this purpose.type D

DIN	6319-D

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.