text.skipToContent text.skipToNavigation
Dear customer, due to the holidays, shipping your order may take a little longer than normal. Please place your order on time. We wish you a happy December month.

Concrete anchoring screw countersunk type SK Ultracut Carbon steel, hardened Zinc plated

Numero articolo
Marchio Fischer
Surface treatment Zinc plated
Thread Concrete thread
Info
  • d = Drill diameter.
  • Md (max.) = Maximum allowable torque in Nm for assembly with an impact wrench.
  • h(nom.) = Minimum anchoring depth.
  • h(min.) = Minimum hole depth.
  • tfix = Grip range.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth.
  • Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut
Visualizza tutte le specifiche 
Visualizza tutte le varianti

Specifiche

Marchio Fischer
Surface treatment Zinc plated
Thread Concrete thread
Info
  • d = Drill diameter.
  • Md (max.) = Maximum allowable torque in Nm for assembly with an impact wrench.
  • h(nom.) = Minimum anchoring depth.
  • h(min.) = Minimum hole depth.
  • tfix = Grip range.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth.
  • Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut

Prodotti ({0})

Mostra tutte le varianti
  Stock Prezzo netto   Iscriviti
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.