Concrete anchoring screw countersunk type SK Ultracut Carbon steel, hardened Zinc plated

Numero articolo
Marchio	FISCHER
Surface treatment	Zinc plated
Thread	Concrete thread
Info	d = Drill diameter. M_{d (max.)}= Maximum allowable torque in Nm for assembly with an impact wrench. h_(nom.)= Minimum anchoring depth. h_(min.)= Minimum hole depth. t_fix= Grip range. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth. Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut

Visualizza tutte le specifiche

Specifiche

Marchio	FISCHER
Surface treatment	Zinc plated
Thread	Concrete thread
Info	d = Drill diameter. M_{d (max.)}= Maximum allowable torque in Nm for assembly with an impact wrench. h_(nom.)= Minimum anchoring depth. h_(min.)= Minimum hole depth. t_fix= Grip range. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25 and with the minimum anchoring depth. Final calculations should comply with the complete European Technical Approval (ETA 15/0352), this approval is also available on request.Ultracut

Per questo prodotto non sono disponibili documenti da scaricare

Prodotti ({0})

Mostra tutte le varianti

Numero articolo Il tuo numero articolo	Specifiche	Stock	Prezzo netto	Prezzo per	Quantità

	Stock	Prezzo netto		Iscriviti Precedente

Nessun risultato è stato trovato per questo filtro.