text.skipToContent text.skipToNavigation

Anchor bolt M10X95/10


The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill

Numero articolo 96907FIS
Diametro
Design Con estremità a bottone
Lunghezza (mm) 133
Dimensione della filettatura (metrica) 10
Diametro del foro (mm) 12
Confezionato per 1

Specifiche

Diametro M10
Design Con estremità a bottone
Lunghezza (mm) 133
Dimensione della filettatura (metrica) 10
Diametro del foro (mm) 12
Profondità di ancoraggio effettiva (mm) 95
Con capsula in resina No
Marchio Fischer
Caratteristiche principali Functioning - The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation. - When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB. - The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole. - When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. - The styrene-free vinyl ester mortar fully seals the drill hole. - When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.
ETA-approval Yes
Weight per piece (g) 83.79
Info
  • do= Nominal diameter of drill bit.
  • Min. td= Recommended drilling depth.
  • hef= Effective anchorage depth.
  • tfix= Grip range.
  • s = Width across flats.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descrizione

The fischer Highbond rod anchor FHB II-A L is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that large machines and heavy steel constructions are securely installed within internal areas.

Numeri di articolo

Numero articolo 96907FIS
EAN 4006209969076
UBB 500616706395
UNSPSC 31162101
Nr articolo produttore  96907
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.