A M16X130 A4

Numero articolo	44975FIS
Diametro
Lunghezza
Design	Con estremità a bottone
Lunghezza	130
Dimensione della filettatura (metrica)	16

Visualizza tutte le specifiche

Confezionato per 1

Specifiche e standard
Download

Specifiche

Diametro	M16
Lunghezza	130 mm
Design	Con estremità a bottone
Lunghezza	130
Dimensione della filettatura (metrica)	16
Diametro del foro (mm)	18
Profondità di ancoraggio effettiva (mm)	80
Con capsula in resina	No
ETA-approval	Yes
Info	The allowable load is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, in combination with bolt class 5.8 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out. For a complete chemical fixing, the resin capsule and internal threaded anchor have to be ordered separately. Setting tool is enclosed in each packing.

Scarica PDF Stampa

Descrizione

The fischer threaded rod FIS A is made from stainless steel. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system of stainless steel threaded rods in combination with fischer injection mortars is suitable and approved for fixings outside and in damp rooms without aggressive conditions.

Numeri di articolo

Numero articolo	44975FIS
EAN	4006209449752
UBB	500616648639
UNSPSC	31161601
Nr articolo produttore	44975

Scarica informazioni aggiuntive