text.skipToContent text.skipToNavigation

8X55


The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel

Descrizione completa 
Numero articolo 508007FIS
Diametro
Lunghezza
Larghezza della chiave (mm) 13
Profondità minima del foro (mm) 51
Lunghezza (mm) 55
Visualizza tutte le specifiche 
Confezionato per 1

Specifiche

Diametro M8
Lunghezza 24 mm
Larghezza della chiave (mm) 13
Profondità minima del foro (mm) 51
Lunghezza (mm) 55
Tipo di filettatura Metric
Dimensione della filettatura (metrica) 8
Diametro del foro (mm) 8
Numero di rondelle 1
Disposizioni di fissaggio Nut
Controventatura Ancora spaccata
Numero di dadi 1
Installazione a pressione SÌ
Installazione preposizionata SÌ
Installazione distanziata No
Spessore massimo di serraggio (mm) 5
Qualità del materiale ancoraggio Altro
Ancoraggio di protezione della superficie Non trattati
Con collare No
Fissaggio con utensile a espansione No
Modello di ancoraggio Filo esterno
Marchio Fischer
Caratteristiche principali Functioning - The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions. - Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut). - When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall. - The head embossing offers a simple control of the anchoring. - In the case of series installation, we recommend using the FABS bolt anchor setting tool.
ETA-approval Yes
Weight per piece (g) 23.92
Info
  • do = Nominal diameter of drill bit.
  • tfix = Grip range.
  • hef = Effective anchorage depth.
  • Min. td = Recommended drilling depth.
  • kN = Load in kN.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descrizione

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside.

Numeri di articolo

Numero articolo 508007FIS
EAN 4048962091106
UBB 500616670724
UNSPSC 31162101
Nr articolo produttore  508007
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.