text.skipToContent text.skipToNavigation

6X30 M6 / 5


The fischer nail anchor FNA II 6 with thread and flange nut is made of stainless steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wal

Descrizione completa 
Numero articolo 44112FIS
Diametro
Larghezza della chiave (mm) 10
Profondità minima del foro (mm) 45
Lunghezza 50
Dimensione della filettatura (metrica) 6
Visualizza tutte le specifiche 
Confezionato per 1

Specifiche

Diametro M6
Larghezza della chiave (mm) 10
Profondità minima del foro (mm) 45
Lunghezza 50
Dimensione della filettatura (metrica) 6
Diametro del foro (mm) 6
Autoperforante No
Zona di trazione del carico (kN) 1.2
Con approvazione SÌ
Spessore massimo di serraggio (mm) 5
Caratteristiche principali Functioning - The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation. - The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall. - Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails.
ETA-approval Yes
Info
  • Drill depth (min.) for through fixing.
  • Allowable loads in kN are valid for non-structural applications.
  • Required safety factors are taken into account.

Descrizione

The fischer nail anchor FNA II 6 with thread and flange nut is made of stainless steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II with thread and flange nut is suitable for fixing metal clamps for conduits and pipes in outdoor areas.

Numeri di articolo

Numero articolo 44112FIS
EAN 4006209441121
UBB 500616643192
UNSPSC 31162103
Nr articolo produttore  44112
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.