text.skipToContent text.skipToNavigation

6X30/60


The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail

Numero articolo 46025FIS
Lunghezza (mm) 97.5
Dimensione della filettatura (metrica) 6
Diametro del foro (mm) 6
Autoperforante No
Spessore massimo di serraggio (mm) 60
Confezionato per 1

Specifiche

Lunghezza (mm) 97.5
Dimensione della filettatura (metrica) 6
Diametro del foro (mm) 6
Autoperforante No
Spessore massimo di serraggio (mm) 60
Marchio Fischer
Weight per piece (g) 23.762
Info
  • Drill depth (min.) for through fixing.
  • Allowable loads in kN are valid for non-structural applications.
  • Required safety factors are taken into account.

Descrizione

The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing mounting rails and timber or sub-constructions in external areas.

Numeri di articolo

Numero articolo 46025FIS
EAN 4006209460252
UBB 500616650502
UNSPSC 31162103
Nr articolo produttore  46025
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.