6X30/30

The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail

Descrizione completa

Numero articolo	44123FIS
Profondità minima del foro (mm)	70
Lunghezza (mm)	67.5
Dimensione della filettatura (metrica)	6
Diametro del foro (mm)	6
Autoperforante	No

Visualizza tutte le specifiche

Confezionato per 1

Specifiche e standard
Download

Specifiche

Profondità minima del foro (mm)	70
Lunghezza (mm)	67.5
Dimensione della filettatura (metrica)	6
Diametro del foro (mm)	6
Autoperforante	No
Zona di trazione del carico (kN)	1.2
Con approvazione	SÌ
Spessore massimo di serraggio (mm)	30
Marchio	Fischer
Caratteristiche principali	Functioning - The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and push-through installation. The FNA II OE and H are suitable for pre-positioned installation. - The installed FNA II nail anchor expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall. - Available setting tools:FNA S-SBO to slip onto the drill,FNA S-SDS for series installation with a drilling hammer,FNA S-H for the manual installation of mounting rails.
ETA-approval	Yes
Weight per piece (g)	16.436
Info	Drill depth (min.) for through fixing. Allowable loads in kN are valid for non-structural applications. Required safety factors are taken into account.

Scarica PDF Stampa

Descrizione

Numeri di articolo

Numero articolo	44123FIS
EAN	4006209441237
UBB	500616644265
UNSPSC	31162103
Nr articolo produttore	44123

Scarica informazioni aggiuntive