text.skipToContent text.skipToNavigation

16X125/50V


The fischer Highbond anchor dynamic FHB-A dyn V is made of zinc-plated steel. The anchor rod is reinforced on the shaft with a sleeve in order to bear the highest transverse forces. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mo

Descrizione completa 
Numero articolo 92040FIS
Design Con estremità a bottone
Lunghezza (mm) 190
Dimensione della filettatura (metrica) 16
Diametro del foro (mm) 18
Profondità di ancoraggio effettiva (mm) 130
Visualizza tutte le specifiche 
Confezionato per 1

Specifiche

Design Con estremità a bottone
Lunghezza (mm) 190
Dimensione della filettatura (metrica) 16
Diametro del foro (mm) 18
Profondità di ancoraggio effettiva (mm) 130
Con capsula in resina No
Marchio Fischer
DIBt-approval Yes
Weight per piece (g) 529.09
Info
  • Ccr, N = Characteristic Edge distance (tensile).
  • Cmin. = Minimum edge distance (tensile).
  • df = Hole diameter in fixture.
  • do = Hole diameter in substrate.
  • hef = Effective embedment depth.
  • hmin = Minimum substrate thickness.
  • ho = Minimum hole depth.
  • Scr, N = Characteristic spacing.
  • Concrete C20/25 recommended load for non-cracked concrete.
  • The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8.
  • The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Scr, N and Ccr, N are taken in to account.
  • Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Descrizione

The fischer Highbond anchor dynamic FHB-A dyn V is made of zinc-plated steel. The anchor rod is reinforced on the shaft with a sleeve in order to bear the highest transverse forces. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. During the setting process, the injection mortar FIS HB fills the annular gap in the fixture, and guarantees optimum load distribution. This allows for the absorption of dynamic alternating loads. The fischer Highbond anchor dynamic FHB-A dyn V is ideally suited for fixing guide rails for elevators, industrial robots, or mobile portal and ceiling cranes in internal areas.

Numeri di articolo

Numero articolo 92040FIS
EAN 4006209920404
UBB 500616702584
UNSPSC 31161601
Nr articolo produttore  92040
Non chiudere questa pagina. Questo messaggio scomparirà quando la pagina sarà completamente caricata.