text.skipToContent text.skipToNavigation

Stud metal end ≈ 1,25d BSW Steel Plain 5.6

Article number
Class 5.6
Material Steel
Thread direction Right
Surface treatment Plain
Thread British Standard Whitworth
Info
  • Depending on availability, class 5.8 can be supplied instead of class 5.6.
    • Whitworth thread (BSW) is not internationally recommended. It is advised to use metric (M) thread instead.
    • ATTENTION: when ordering these studs the proper designation is d x L, e.g. stud 5/16X25, where the working length L = 25 mm and the thread length on the metal end e = 10 mm. The overall length of the stud is 25 + 10 = 35 mm. The thread length on the nut end b = 18 mm.
    • The thread on the metal end is made with a "transition fit", which prevents loosening of the metal end of the studs during disassembly.
    • These studs, with a metal end ≈1,25d, have many applications, but are mainly intended for use in cast iron counterparts.
View all specifications 
View all variants

Specifications

Class 5.6
Material Steel
Thread direction Right
Surface treatment Plain
Thread British Standard Whitworth
Info
  • Depending on availability, class 5.8 can be supplied instead of class 5.6.
    • Whitworth thread (BSW) is not internationally recommended. It is advised to use metric (M) thread instead.
    • ATTENTION: when ordering these studs the proper designation is d x L, e.g. stud 5/16X25, where the working length L = 25 mm and the thread length on the metal end e = 10 mm. The overall length of the stud is 25 + 10 = 35 mm. The thread length on the nut end b = 18 mm.
    • The thread on the metal end is made with a "transition fit", which prevents loosening of the metal end of the studs during disassembly.
    • These studs, with a metal end ≈1,25d, have many applications, but are mainly intended for use in cast iron counterparts.

Standards

DIN 939

Products ({0})

Show all variants
  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.