Fischer fis a m16x130 r threaded rod

Full description

Article number	44975FIS
Diameter
Length
Design	With stud end
Length	130
Thread size (metric)	16

View all specifications

Packed per 10

Full Box only

Specifications & standards
Downloads

Specifications

Diameter	M16
Length	130 mm
Design	With stud end
Length	130
Thread size (metric)	16
Drill hole diameter (mm)	18
Effective anchorage depth (mm)	80
With resin capsule	No
ETA-approval	Yes
Info	The allowable load is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, in combination with bolt class 5.8 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out. For a complete chemical fixing, the resin capsule and internal threaded anchor have to be ordered separately. Setting tool is enclosed in each packing.

Download as PDF Print

Description

The fischer threaded rod FIS A is made from stainless steel. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system of stainless steel threaded rods in combination with fischer injection mortars is suitable and approved for fixings outside and in damp rooms without aggressive conditions.

Article numbers

Article number	44975FIS
EAN	4006209449752
UBB	500616648639
UNSPSC	31161601
Manufacturer article nr	44975

Download additional information