Plain washer DIN 125-1A Steel Zinc flake Cr6+free - ISO 10683 flZnnc 200 HV38125
Plain washer with outside diameter ≈ 3 x nominal thread diameter ISO 7093-1 Steel Zinc plated 200 HV38216
Plain washer flat punched DIN 125-1A Steel Zinc plated 140 HV38031
Plain washer with outside diameter ≈ 3 x nominal thread diameter DIN 9021 Plastic Polyamide (nylon) 6.656330
Plain washer type M NF E25-513 Stainless steel A2 100 HV51417
Plain washer with outside diameter ≈ 3 x nominal thread diameter ISO 7093-1 Steel Plain 200 HV38215
Plain washer DIN 126 Steel Plain 100 HV38200
Plain washer ISO 7089 Steel Zinc plated with thick Cr(III) passivation 200 HV38139
Fender washer Steel Zinc plated yellow passivated38401
Plain washer, chamfered ISO 7090 Stainless steel A2 200 HV51427
Plain washer type LL NF E25-513 Steel Plain 100 HV38073
Plain washer for bolts with heavy type spring pins DIN 7349 Steel Hot dip galvanized 200 HV (>M16 100HV)38438
Plain washer type M NF E25-513 Steel Plain 100 HV38053
Plain washer, chamfered ISO 7090 Steel Zinc plated 200 HV38181
Plain washer type Z NF E25-513 Steel Zinc plated 100 HV38045
Plain washer with outside diameter ≈ 3 x nominal thread diameter DIN 9021 Plastic Polyamide (nylon) 6.656332
Plain washer DIN 125-1A Steel Zinc plated with thick Cr(III) passivation 140 HV38081
Plain washer for bolts with heavy type spring pins DIN 7349 Steel Zinc plated yellow passivated 200 HV (>M16 100HV)38435
Plain washer, chamfered ISO 7090 Steel Plain 200 HV38161
Plain washer with outside diameter ≈ 3 x nominal thread diameter ISO 7093-1 Stainless steel A4 200 HV55531
Washers are small, flat rings with various functions. A washer is often used with a bolt-nut connection to increase the surface area of the contact surface. There are also versions with a larger diameter than the standard DIN 9021. This large diameter mainly distributes the clamping force over a larger area so that the clamped material deforms less easily.
A washer is not loaded on tensile strength. Therefore, the washer has a hardness instead of tensile strength. The hardness indicates how easily the material deforms. There are versions with and without chamfers. The chamfer reduces the chance of imprinting in the material during assembly.
The washer comes in many types and sizes. We offer various HV (Vickers hardness) for the washers. Fabory also has stainless steel washers in its range for when corrosion resistance is essential to your considerations. The DIN 125 comes in two variants: the DIN 125A (without chamfer) and the DIN 125B (with chamfer).
In terms of surface treatments, we offer an extensive choice. Some options include plain steel, hot-dip galvanised, and electrolytically galvanised washers. The electrolytically galvanised washer has, among others, yellow and black passivation as an option.