text.skipToContent text.skipToNavigation

BENNING ben installation tester pv 1-1


Article number 7D224283
Measured value memory Yes
Indication Digital
Low resistance measurement No
Earthing measurement Yes
Interface Yes
Isolation resistance measurement No
Over voltage protector testing No
Packed per 1

Specifications

Measured value memory Yes
Indication Digital
Low resistance measurement No
Earthing measurement Yes
Interface Yes
Isolation resistance measurement No
Over voltage protector testing No
Loop resistance/impedance measurement No
Mains internal resistance measurement No
RCD/FI testing Yes
Field rotation test No
Selective grounding measurement No
Earth loop measurement No
Specific grounding measurement No
Printer connection No
Limit value indication No
RCD/FI testing with rising residual current Yes
RCD/FI analysis function No
Detection short-circuit current/over current protection Yes
Remote control for testing device No
Loop measurement without RCD/FI release No
Resistances of isolating floors and walls No
Printer integrated No
Isolation resistance measurement with ramp function No
Low resistance measurement with ramp function No
PRCD testing type S, type K No
Testing of IMDs and RCMs No
Measuring of leakage currents with adapter No
Testing of charging devices E-Mobility, simulation of vehicle status No
Structured measured value memory No

Article numbers

Article number 7D224283
EAN 4014651421011
UBB 500729767938
UNSPSC 27110000
Manufacturer article nr  05042101
Do not close this page. This message will disappear, when the page is fully loaded.