text.skipToContent text.skipToNavigation

Hand pipe bending set up to 180 deg working range 6-18 mm 10-part GEDORE


For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391) with 1.0 - 2.0 mm wall thicknesses, composite pipes up to 16 mm as well as bendable stainless steel pipes with 1.0 - 1.5 mm wall thicknesses, With 8 bending formers for pipes with Ø 6, 8, 10, 12, 14, 15, 16, 18 mm, For clamping in a vice or in combination with tripod

Article number 5M249300
Tube diameter (mm) 18
Tube diameter (mm) ['6.000', '18.000']
Electric drive No
Suitable for copper No
Suitable for steel Yes
Packed per 1

Specifications

Tube diameter (mm) 18
Tube diameter (mm) ['6.000', '18.000']
Electric drive No
Suitable for copper No
Suitable for steel Yes
Max. bending angle (°) 180

Description

For precision steel pipes EN 10305-3 (DIN 2394), hydraulic pipes EN 10305-1 (DIN 2391) with 1.0 - 2.0 mm wall thicknesses, composite pipes up to 16 mm as well as bendable stainless steel pipes with 1.0 - 1.5 mm wall thicknesses, With 8 bending formers for pipes with Ø 6, 8, 10, 12, 14, 15, 16, 18 mm, For clamping in a vice or in combination with tripod no. 268500 for stationary use, Hydraulic pipes EN 10305-1 (DIN 2391) with 1.0 - 2.0 mm wall thicknesses

Article numbers

Article number 5M249300
EAN 4017981278607
UBB 500642738602
UNSPSC 27112403
Manufacturer article nr  1589857
Do not close this page. This message will disappear, when the page is fully loaded.