text.skipToContent text.skipToNavigation

Gedore 1.55/2 Hydraulic Press with Pressure Releasing Head 15T 15mm Stroke 90mm


Operation: With pressure released, the press is placed between the pressure spindle and the end of the shaft. The pressure spindle is then tightened firmly. Care must be taken that the centreline of the shaft, the hydraulic press, and the pressure spindle are exactly in alignment. Then the hydraulic spindle is screwed inwards., Important note: Release t

Article number 1V703867
Accessories Yes
Part No
Brand GEDORE
Height (mm) 90
Model 1.55/2
Packed per 1

Specifications

Accessories Yes
Part No
Brand GEDORE
Height (mm) 90
Model 1.55/2

Description

Operation: With pressure released, the press is placed between the pressure spindle and the end of the shaft. The pressure spindle is then tightened firmly. Care must be taken that the centreline of the shaft, the hydraulic press, and the pressure spindle are exactly in alignment. Then the hydraulic spindle is screwed inwards., Important note: Release the hydraulic press after use, With pressure released, the press is placed between the pressure spindle and the end of the shaft. The pressure spindle is then tightened firmly. Care must be taken that the centreline of the shaft, the hydraulic press, and the pressure spindle are exactly in alignment. Then the hydraulic spindle is screwed inwards., Important: Release the hydraulic press after use

Article numbers

Article number 1V703867
EAN 4036976105841
UBB 500642698848
UNSPSC 27121500
Manufacturer article nr  8024170
Do not close this page. This message will disappear, when the page is fully loaded.