text.skipToContent text.skipToNavigation

Gedore 1.30/9 Internal Extractor 100mm Jaw Depth


Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extracted. The counter-support brace is then added. Both feet must be aligned parallel to the spindle to ensure rigidity., The design can vary from the image, Can be

Article number 7S537589
Design Other
Reversible arms Yes
Chucking clamp Yes
Clamping spread (internal pulling) (mm) 70 - 100
Model 1.30/9
Packed per 1

Specifications

Design Other
Reversible arms Yes
Chucking clamp Yes
Clamping spread (internal pulling) (mm) 70 - 100
Model 1.30/9

Description

Operation: The internal extractor is inserted into the bearing and the spindle screwed in. The sharp turned-out shoulders of the pulling shell jaws will press outwards behind the part to be extracted. The counter-support brace is then added. Both feet must be aligned parallel to the spindle to ensure rigidity., The design can vary from the image, Can be used with either sliding hammer or counter-support brace, * min. and max. dimension in idle and spread state, Can be used with either sliding hammer or counter-support brace

Article numbers

Article number 7S537589
EAN 4036976105377
UBB 500642686884
UNSPSC 27110000
Manufacturer article nr  8014020
Do not close this page. This message will disappear, when the page is fully loaded.