Fischer fzea ii 12x40 m10 r hammerset anchor

Full description

Article number	47307FIS
Length
Screwing system	Other
Min. drill hole depth (mm)	43
Length	43
Thread type	Metric

View all specifications

Packed per 1

Specifications & standards
Downloads

Specifications

Length	43 mm
Screwing system	Other
Min. drill hole depth (mm)	43
Length	43
Thread type	Metric
Thread size (metric)	10
Drill hole diameter (mm)	12
Number of washers	0
Fastening provision	Other
Bracing	Split anchor
Effective anchorage depth (mm)	40
Number of nuts	0
Push-through installation	No
Pre-positioned installation	Yes
Spaced installation	No
With collar	No
Fastening by expander tool	Yes
Anchor model	External thread
ETA-approval	Yes
Info	d_o= Nominal diameter of drill bit. t = Recommended drilling depth. L (h_ef) = Effective anchorage depth. l_smin. = Screw-in depth min. l_smax. = Screw-in depth max. kN = Load in kN in combination with 8.8 & A4-70 bolts. T_inst= Tightening torque in Nm. The cone must be installed with setting tool type EAW H (narrow end) into the anchor body (article group 63322). Only part of the approval for light suspended ceilings. For further technical data the approval is available on request.

Download as PDF Print

Description

The fischer ZYKON Hammerset anchor FZEA II is an internal threaded anchor made of stainless steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the time-saving through-type installation. The expansion sleeves are driven in with the setting tool FZED Plus by driving in the internal expansion pin above the cone. This fills the undercut drill hole with a positive fit. The fischer ZYKON Hammerset anchor FZEA II is suitable for single-point fixings of pipelines, cable trays, and air lines in external areas in cracked concrete.

Article numbers

Article number	47307FIS
EAN	4006209473078
UBB	500616735675
UNSPSC	31162101
Manufacturer article nr	47307

Download additional information