Fischer fis a m12x120 58 zp threaded rod

Full description

Article number	44971FIS
Diameter
Length
Design	With stud end
Length	120
Thread size (metric)	12

View all specifications

Packed per 1

Specifications & standards
Downloads

Specifications

Diameter	M12
Length	120 mm
Design	With stud end
Length	120
Thread size (metric)	12
Drill hole diameter (mm)	14
Effective anchorage depth (mm)	70
With resin capsule	No
ETA-approval	Yes
Info	C_cr, N = Characteristic Edge distance (tensile). C_min.= Minimum edge distance (tensile). d_f= Hole diameter in fixture. d_o= Hole diameter in substrate. h_ef= Effective embedment depth. h_min= Minimum substrate thickness. h_o= Minimum hole depth. S_cr, N = Characteristic spacing. Concrete C20/25 recommended load for non-cracked concrete. The allowable load is only valid for AcryMaxx Chemical Mortar in combination with Anchor studs, steel grade 5.8. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Download as PDF Print

Description

The fischer threaded rod FIS A is made from zinc-plated, steel grade 5.8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

Article numbers

Article number	44971FIS
EAN	4006209449714
UBB	500616648225
UNSPSC	31161601
Manufacturer article nr	44971

Download additional information