Fischer fbn ii 16/25 hdg bolt anchor

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The

Full description

Article number	507598FIS
Diameter
Length
Wrench width (mm)	24
Thread length (mm)	89
Min. drill hole depth (mm)	129

View all specifications

Packed per 1

Specifications & standards
Downloads

Specifications

Diameter	M16
Length	89 mm
Wrench width (mm)	24
Thread length (mm)	89
Min. drill hole depth (mm)	129
Length	145
Thread type	Metric
Thread size (metric)	16
Drill hole diameter (mm)	16
Number of washers	1
Fastening provision	Nut
Bracing	Split anchor
Number of nuts	1
Push-through installation	Yes
Pre-positioned installation	Yes
Spaced installation	No
Max. clamping thickness (mm)	25
Surface protection anchor	Hot-dip galvanized
With collar	No
Fastening by expander tool	No
Anchor model	External thread
Brand	Fischer
Info	d_o= Nominal diameter of drill bit. t_fix= Grip range. h_ef= Effective anchorage depth. Min. t_d= Recommended drilling depth. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Download as PDF Print

Description

Article numbers

Article number	507598FIS
EAN	4048962087765
UBB	500616669676
UNSPSC	31162101
Manufacturer article nr	507598

Download additional information