Fischer fbn ii 12/5 (12x84) k r bolt anchor

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel

Full description

Article number	508011FIS
Diameter
Length
Wrench width (mm)	19
Min. drill hole depth (mm)	75
Length	84

View all specifications

Packed per 1

Specifications & standards
Downloads

Specifications

Diameter	M12
Length	39 mm
Wrench width (mm)	19
Min. drill hole depth (mm)	75
Length	84
Thread type	Metric
Thread size (metric)	12
Drill hole diameter (mm)	12
Number of washers	1
Fastening provision	Nut
Bracing	Split anchor
Number of nuts	1
Push-through installation	Yes
Pre-positioned installation	Yes
Spaced installation	No
Material quality anchor	Other
Surface protection anchor	Untreated
With collar	No
Fastening by expander tool	No
Anchor model	External thread
ETA-approval	Yes
Info	d_o= Nominal diameter of drill bit. t_fix= Grip range. h_ef= Effective anchorage depth. Min. t_d= Recommended drilling depth. kN = Load in kN. The allowable load is valid for one single anchor, at cracked concrete (tensile zone) with concrete class C20/25, incl. partial safety factor γ_f= 1,4 and if the S_cr, N and C_cr, N are taken in to account. When reduction on spacing and edge distance take place a re-calculation of forces should be carried out by making use of the technical guide or calculation software, they are available on request. Final calculations should comply with the complete European Technical Approval (ETA), this approval is also available on request.

Download as PDF Print

Description

Article numbers

Article number	508011FIS
EAN	4048962091120
UBB	500616670989
UNSPSC	31162101
Manufacturer article nr	508011

Download additional information