text.skipToContent text.skipToNavigation

Facom Rotary burr 20,5MM


3 HSS cutting edges for countersunk screw holes. Requires a pilot hole with a cylindrical bit ref 222A.T.

Article number 9G564780
Design Chamfering cutter
Total length (mm) 63
Shaft diameter (mm) 10
Suitable for stainless steel No
Suitable for plastic Yes
Packed per 1

Specifications

Design Chamfering cutter
Total length (mm) 63
Shaft diameter (mm) 10
Suitable for stainless steel No
Suitable for plastic Yes
Suitable for steel Yes
Suitable for cast iron Yes
Suitable for wood Yes
Suitable for nonferrous metals Yes
Number of teeth 3
Cutting material HSS
Countersink angle (°) 90
Countersink diameter (mm) 20.5 - 20.5
Number of cutting edges 3
Suitable for solid wood Yes
With shaft Yes
Diameter cutter (mm) 20.5

Description

3 HSS cutting edges for countersunk screw holes. Requires a pilot hole with a cylindrical bit ref 222A.T.

Article numbers

Article number 9G564780
EAN 3148511542941
UBB 500637624429
UNSPSC 23251706
Manufacturer article nr  229.TT4
Do not close this page. This message will disappear, when the page is fully loaded.