text.skipToContent text.skipToNavigation

BENNING ben multimeter mm true rms 7-2 1000 v


Benning MM 7-2 True RMS digital multimeter for industry, service, electrical trade and HVAC technology. Digital display. Analogue bargraph display yes. 4 5/6-digit LCD display (60,000 dots). Backlighting of the LC display. Lowest resolution DC voltage 0.01 mV. Max. Voltage measuring range DC 1000 V. Lowest resolution AC voltage 0.01 mV. Max. Voltage mea

Article number 3G847040
Measured value memory Yes
Indication Digital
Measuring range selection Automatic
True RMS measurement Yes
Continuity test Yes
Packed per 1

Specifications

Measured value memory Yes
Indication Digital
Measuring range selection Automatic
True RMS measurement Yes
Continuity test Yes
Interface No
Capacitance measurement Yes
Frequency measurement Yes
With decibel measurement (dB) No
Data hold Yes
IR interface No
Explosion-tested version No
Analogue bar graph display Yes
Bluetooth interface No
Resistance test/diode test Yes
Inductance measurement No
Lowest resolution, DC voltage 0.01 mV
Lowest resolution, AC voltage 0.01 mV
Lowest resolution, resistance 0.01 Ohm
With conductivity measurement No
Max. voltage measuring range, AC (V) 1000
Max. voltage measuring range, DC (V) 1000
Max. current measuring range, AC (A) 10
Max. current measuring range, DC (A) 10
Max. resistance measuring range (MOhm) 60
Max. value storage Yes
Multiple display No
Measuring circuit category CAT IV
Min. value storage Yes
Nominal test voltage 100 V No
Nominal test voltage 1000 V No
Nominal test voltage 250 V No
Nominal test voltage 500 V No
Relative value measurement Yes
Peak value memory Yes
Duty cycle measurements Yes
Degree of protection (IP) IP40
Temperature measurement Yes
Max. temperature measuring range (°C) 1090
Max. capacitance measuring range (µF) 10000
Max. frequency measuring range (kHz) 1000
Lowest resolution, frequency Other
Analogue bar graph display analogue/logarithmical Yes
Milliohm measurement with 4 wire technique (Kelvin connection) No
Temperature measurement RTD No
Temperature measurement TC No
Nominal test voltage 10 V No
Nominal test voltage 50 V No
Cable length measurement No
Cable symmetry testing for two wire connections a-b-E No
Power and energy measurement No
Harmonics analysis/power quality No
Rotational speed measuring No
Automatic circuit breaker No
Max. voltage measuring circuit category (V) 600
With display backlight Yes

Description

Benning MM 7-2 True RMS digital multimeter for industry, service, electrical trade and HVAC technology. Digital display. Analogue bargraph display yes. 4 5/6-digit LCD display (60,000 dots). Backlighting of the LC display. Lowest resolution DC voltage 0.01 mV. Max. Voltage measuring range DC 1000 V. Lowest resolution AC voltage 0.01 mV. Max. Voltage measuring range AC 1000 V. Lowest resolution direct current 0.01 µA. Max. Current measuring range DC 10 A. Lowest resolution alternating current 0.01 µA. Max. Current measuring range AC 10 A. Lowest resolution resistance 0.01 Ohm. Max. Resistance measuring range 60 MOhm. Lowest resolution capacitance 0.01 nF. Max. Capacitance measuring range 10000 µF. Lowest resolution frequency 0.001 Hz. Max. Frequency measuring range 1 MHz. Mains level up to 50 kHz, logic level up to 1 MHz. Lowest resolution temperature 0.1 °C. Max. Temperature measuring range 1090 °C. Temperature measurement yes. Temperature measurement -200 °C - +1090 °C. Continuity test/diode test yes. Continuity test (< 100 ? - 420 ?)/ diode test (3.0 V). True RMS measurement method yes True RMS (AC, AC+DC). Ergonomic housing with integrated rubber protective frame for increased grip and shock resistance. Optical and acoustic socket control (µA/mA and A range) with warning in the event of incorrect measuring range selection. AutoV function with automatic AC/DC switching and measuring range selection. LoZ function with low input impedance (> 2 k?) for suppression of capacitive/inductive interspersed voltages. Low-pass filter (HFR, high frequency suppression, 1000 Hz) for measurements on pulsed motor drives. Volt sensor for non-contact and single-pole phase and cable break testing (2 sensitivities) (LCD/buzzer). Fast continuity/diode test (optical/acoustic). Automatic measuring range selection. Automatic switch-off. Automatic low battery indicator. Instantaneous value memory Data HOLD yes. Measured value memory yes. Maximum value memory yes MAX. Minimum value memory yes MIN. Average value memory yes AVG. Relative value measurement yes REL. Peak value memory yes PEAK. Duty cycle measurements yes. Duty cycle (%).4 mA - 20 mA DC current loop (%). Measuring circuit category CAT IV. Max. Voltage measuring circuit category 600 V. Measuring circuit category CAT III. max. voltage measuring circuit category Voltage measuring circuit category 1000 V. Includes silicone test leads with gold-plated 2 mm and 4 mm measuring tip (screw-on), bag, wire temperature sensor, 3 x 1.5 V Micro/AAA/LR03 batteries, 11 A fuse 10218772), 0.4 A fuse (10231514).

Article numbers

Article number 3G847040
EAN 4014651446908
UNSPSC 27110000
Manufacturer article nr  044690
Do not close this page. This message will disappear, when the page is fully loaded.