Electronics Mounting Pliers for bending and cutting off wire ends on components. . . High, slim sleeves for fine and comfortable gripping between thumb and index finger. . Smooth ground gripping surfaces, edges carefully deburred. Low-friction double spring for gentle and even opening. The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools. to bend and cut wire at 1.6 mm length below the board. - Cutting capacities soft wire (diameter): Ø 1.2mm- Jaw thickness (joint) (T1): 7.0mm- Tips thickness (W4): 4.0mm- Head width (W3): 11.0mm- Handle width: 7.5mm- Jaw length (L3): 18.0mm- Application: cut at 1.6 mm and bend wire