text.skipToContent text.skipToNavigation
We are aware of intermittent phone issues and are working to resolve them. Should you be unable to reach us, please connect via the live chat, or email uksales@fabory.com and we will respond ASAP

MAXXFAST Hammerset anchor Steel Zinc plated

Article number
Material Steel
Surface treatment Zinc plated
Thread Metric thread
Info *Special for diamond drilling machines.
  • do= Nominal diameter of drill bit
  • dw= Diameter of clearance hole in the fixture
  • h1= Depth of drilled hole to deepest point
  • hc= Minimal thickness of concrete element
  • e = Bolt length to be threaded
  • Smin.= Minimal spacing
  • Cmin.= Minimal edge distance
  • Nrec= Recommended load in kN
  • Tinst= Tightening torque in Nm
  • The allowable load (Nrec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Smin.and Cmin.are taken in to account.

Specifications

Material Steel
Surface treatment Zinc plated
Thread Metric thread
Info *Special for diamond drilling machines.
  • do= Nominal diameter of drill bit
  • dw= Diameter of clearance hole in the fixture
  • h1= Depth of drilled hole to deepest point
  • hc= Minimal thickness of concrete element
  • e = Bolt length to be threaded
  • Smin.= Minimal spacing
  • Cmin.= Minimal edge distance
  • Nrec= Recommended load in kN
  • Tinst= Tightening torque in Nm
  • The allowable load (Nrec) is valid for one single anchor, at non-cracked concrete (pressure zone) with concrete class C20/25, incl. partial safety factor γf= 1,4 and if the Smin.and Cmin.are taken in to account.

Products ({0})

  Stock Net price   Sign up
Do not close this page. This message will disappear, when the page is fully loaded.