text.skipToContent text.skipToNavigation

Knipex Crimping pliers 9753-08-190 SB


Self-Adjusting Crimping Pliers for wire ferrules For crimping wire ferrules according to DIN 46228 parts 1 + 4. Self-adjusting adaptation to the desired wire ferrule size: no wrong crimps caused by using the wrong die. Frontal insertion of the wire ferrules into the pliers. Repetitive, high crimping quality due to ratchet mechanism (unlockable). Tools h

Article number K1175.358.191
Suitable for Cable end sleeves
Length 190
With locking device (for mechanical tools) Yes
Cross section (mm²) 0.08 - 10
Packed per 1

Specifications

Suitable for Cable end sleeves
Length 190
With locking device (for mechanical tools) Yes
Cross section (mm²) 0.08 - 10

Description

Self-Adjusting Crimping Pliers for wire ferrules For crimping wire ferrules according to DIN 46228 parts 1 + 4. Self-adjusting adaptation to the desired wire ferrule size: no wrong crimps caused by using the wrong die. Frontal insertion of the wire ferrules into the pliers. Repetitive, high crimping quality due to ratchet mechanism (unlockable). Tools have been set precisely (calibrated) in the factory. Optimum transmission of force thanks to toggle lever for fatigue-reduced operation. Handy shape and low weight provide high operation comfort. Approved crimping according to UL in conjunction with KNIPEX wire ferrules 97 99 330 - 399. compression from 0.08 - 10.0 mm² in one profile. wire ferrules up to 2.5 mm² can also be loaded parallelly from the side. suitable in particular for all twin wire ferrules up to 2 x 4 mm² or 2 x AWG 12. self-service card/blister. - Application: Wire ferrules- Capacity in square millimetres: 0.08 — 10mm²- Number of crimp profiles: 1- AWG: 28 — 8

Article numbers

Article number K1175.358.191
EAN 4003773040484
UBB 500500420632
UNSPSC 27112147
Manufacturer article nr  97 53 08 SB
Do not close this page. This message will disappear, when the page is fully loaded.