Wera BIT-CHECK Bit Set in Holder PH/PZ/Torx/Groove Bit 29-Piece

Bit-Check 30 Diamond 1, 30 pieces 1x 889/4/1 K Rapidaptor Universal Bit Holder: 1/4", x 50 mm 7x 851/1 BDC bits: 2x PH 1x25 mm, 4x PH 2x25 mm, PH 3x25 mm 7x 855/1 BDC bits: 2x PZ 1x25 mm, 4x PZ 2x25 mm, PZ 3x25 mm 12x 867/1 BDC TORX® bits: 2x TX 10x25 mm, 2x TX 15x25 mm, 3x TX 20x25 mm, 3x TX 25x25 mm, TX 30x25 mm, TX 40x25 mm 3x 800/1 BDC bits: 0.8x5.5x25 mm, 1x5.5x25 mm, 1.2x6.5x25 mmBits with tiny diamond particles on the bit tip. This ensures a secure fit in the screw head, reduces the contact pressure required and lowers the risk of slipping. BiTorsion bits with a torsion zone - where kinetic energy is diverted from peak loads. This greatly extends the product service life. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward - for rapid bit change with just one hand. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera ",Take it easy", Tool Finder with its colour coding and clearly visible imprint.