Spring-type straight pin (spiral pin) coiled, heavy duty ISO 8748 Spring steel 420-545 HV30

Cikkszám
Brand	Fabory
Material	Spring steel
Material technical	420-545 HV30
Info	Warning: electroplating of these products may cause hydrogen embrittlement. Dimensions d₁ and d₂ in above table are before mounting. V = minimum shear strength, double, in kN. The recommended tolerance class for the accommodating hole diameter d (nominal) is H12.Special features of coiled spring-type straight pins (spiral pins): These pins are used for connections or the positioning of two or more parts and may also be used as shafts and hinge-, stop- or carrierpins, and are easily disassembled. Thanks to their spiral shaped cross section (approximately 2.1/4 coils) these pins are very flexible and suitable for repeated use with dynamic loads. Equal stress distribution throughout their cross section against the hole wall produces a good press fit, which can absorb shear forces unaffected by the direction. The pins are chamfered at both ends, so they can easily be inserted and installed automatically.

Tekintse meg az összes specifikációt

Műszaki adatok

Brand	Fabory
Material	Spring steel
Material technical	420-545 HV30
Info	Warning: electroplating of these products may cause hydrogen embrittlement. Dimensions d₁ and d₂ in above table are before mounting. V = minimum shear strength, double, in kN. The recommended tolerance class for the accommodating hole diameter d (nominal) is H12.Special features of coiled spring-type straight pins (spiral pins): These pins are used for connections or the positioning of two or more parts and may also be used as shafts and hinge-, stop- or carrierpins, and are easily disassembled. Thanks to their spiral shaped cross section (approximately 2.1/4 coils) these pins are very flexible and suitable for repeated use with dynamic loads. Equal stress distribution throughout their cross section against the hole wall produces a good press fit, which can absorb shear forces unaffected by the direction. The pins are chamfered at both ends, so they can easily be inserted and installed automatically.

Szabványok

DIN	7344
ISO	8748

Ehhez a termékhez nincsenek letölthető dokumentumok

Termékek ({0})

Az összes változat megjelenítése

Cikkszám Az Ön Cikksz.	Technikai adatok	Készlet	Nettó ár	Ár /	Mennyiség

	Készlet	Nettó ár		Regisztrálj Előző

Nincs találat a szűrésre