Stahlwille MANOSKOP 714 Torque Wrench 22 x 28mm 80-800Nm 1158mm

4 measuring modes (torque, angle of rotation, torque with control variable angle of rotation, angle of rotation with control variable torque)high-resolution colour graphic display with additional lateral signal lightsfree configurable menu structureoptional: Li-ion battery no. 7195-2 and charger no. 71603 function modes: triggering, peak hold (indicating operation with peak value display) and track (indicating operation with momentary value display)Micro-USB interfaceBayonet catch for battery compartmentQuickRelease safety lock - exchange system for insert.wkz.Data storage (= 2. 500 tightening operations)up to 200 tightening operations in a maximum of 25 sequence plans are programmabledifferent tolerance limits can be set depending on the tightening operationacoustic and visual evaluation of the tightening operationquick and precise setting via keypadno unintended adjustment by automatic key lockoverload protection by acoustic and optical warning signal as well as forced release (right)automatic indication of the next calibration date according to time and/or number of loadsfully automatic calibration and adjustment with the perfectControl® calibration and adjustment device no. 7794-2 (torque) or 7794-3 (torque and angle of rotation)Units of measurement: N·m, ft·lb, in·lbautomatically correct tightening torque after entering a deviating stitch sizeimmediately ready for operation again after unloadingRight and left tightening - for left tightening in function mode triggering may be necessary. the insertion tool must be turned by 180°sensible and audible trigger signaltorque and angle of rotation visible at the same timemeasurement independent of the point of force application (Gr. 1, 2 and 4)safe handling due to ergonomically shaped handle (resistant to oils, greases, fuels, brake fluids and Skydrol)3 certificates (torque indicating/releasing according to DIN EN ISO 6789-2:2017, angle of rotation)in sturdy plastic box (Gr. 40-100 in sheet steel case)registered design, patentedSupplied with SensoMaster 4 software, USB cable, 4 AAA/LR03 micro batteries, 1.5 V. Micro NiMH rechargeable batteries AAA, 1.2 V, can be usedDisplay resolution angle of rotation 0.1°Display deviation angle of rotation ±1° ±1 digit up to 100°, >100° at least 1% ± 1 digitDisplay resolution torque = 60 N·m: 0.01 N·m, &60 N·m: 0.1 N·mDisplay deviation torque ± 2%, ± 1 digit